19
Illustrations contained in this document are for representation only.
The unit has a built-in tuner for FM radio
function.
Manual Tuning
1.
Connect the FM antenna.
2.
Press the TUNER button on the remote.
3.
When the FM station broadcasts Stereo
sound, STEREO is displayed.
4.
Tune a station by pressing TUNER + or
TUNER - on the remote until the desired
station is found. You can also press and
hold the TUNER +/- button for
approximately one second to use the
automatic search function; in this mode,
the unit will automatically find a station.
5.
Repeat step 4 to tune to another radio
station.
Note: If there is interference, change the location
of the antenna until you get optimal sound.
TV and other electronic devices could cause
interference. Position the antenna away from
electronic devices.
Storing Radio Stations
The receiver can store up to 40 radio stations.
You can enter radio stations yourself, or the
receiver can store all available radio stations
automatically, in ascending order.
Automatic preset programming
1.
Press the TUNER button on the remote
control to select TUNER mode.
2.
Press and hold TUNER for 3 seconds to start
the automatic preset programming.
Note: A weak signal can affect the “Automatic
preset programming function.” You may need to
adjust the antenna for a more efficient search.
3.
Radio frequencies will be browsed and radio
stations stored automatically. When all the
available radio stations are stored, or if all
40 memory locations are full, the auto
preset programming will stop.
Manual preset
1.
Tune to a radio station (see
Manual tuning
on the left).
2.
Press MENU on the remote control. PRESET
will appear on the display.
3.
While the display is flashing P01,2, input
your desired preset number (1-40) using the
up/down arrow buttons. Press Menu to
store it.
Retrieving Preset Stations
1.
Press the
TUNER
button on the remote to
enter the tuner mode.
2.
Press or on the unit or PR+ or PR-
on the remote to search up or down the
preset stations.
Using the Radio
RDT170
1/31/05, 7:46 AM
19