Copyright © 2017 RCA Communications Systems
43
RDR2300
TM
Professional Digital Two-Way Radio Instruction Manual
displayed when Scan is enabled. The LED
turns off and the Scan icon disappears when
Scan is disabled.
Responding to a Scan
During scanning, your radio stops on any
channel / group where activity is detected. After
the transmission is over the radio remains on the
active channel for a programmed time period
known as “hang time”.
1. Press the PTT button during “hang time” to
respond to the call. The LED lights up red.
2. Release PTT button to listen.
Note:
If you do not respond within the “hang
time” period, the radio continues scanning other
channels / groups.
Deleting a Nuisance Channel
If a channel continually generates unwanted
calls or noise (termed a “nuisance” channel),
you can temporarily remove the unwanted
channel from the scan list.
Note:
This capability does not apply to the
channel designated as the Selected Channel.
This feature is not accessible through the
menu.
1. When your radio stops on an unwanted or
nuisance channel, press the programmed
Nuisance Channel Delete button until you
hear a tone.
2. Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Restoring a Nuisance Channel
To restore the deleted nuisance channel, power
the radio off and back on again. OR - Press Stop
and Start to restart a scan via the programmed
Scan button.
Utilities
(BR300D
TM
Only)
Keypad Locked and Keypad Unlocked
You can lock your radio’s keypad to avoid an
inadvertent key entry.
