Setup and Connections
15
Other Remote Control Buttons (listed alphabetically)
Note:
The remote packed with your DVD Player is
programmed to operate most RCA, GE, and
PROSCAN televisions. The remote can also
operate other brands of televisions, but you
must program it to do so (see page 86).
This section describes what each button does when
the remote is operating the DVD Player. You put the
remote in “DVD mode” by pressing the DVD button
on the remote.
The buttons on the remote may operate differently when the remote
is controlling other components.
Example: When the remote is operating the DVD Player, pressing
CH+ takes you to the beginning of the next chapter or track on the
disc. When the remote is operating the TV, pressing CH+ takes you to
the next channel.
Arrow buttons
Use the arrow buttons (left, right, up, and down) to
move through the on-screen menu. You highlight a menu item by
pressing the arrow buttons. You select a highlighted item by pressing
the OK button.
ANGLE
Press this button to access various camera angles on a disc
(if the disc contains multiple camera angles).
ANTENNA
Lets you change the source of the video signal from
satellite signals to an off-air antenna or cable signal and vice versa.
AUDIO
Use this button to access various audio languages on a disc
(if the disc contains multiple audio streams).
CH+
Allows you to move to the beginning of the next chapter or
track on a disc (in effect, “skipping” the chapter or track).
CH–
Allows you to move to the beginning of the preceding chapter
or track on a disc (in effect, “skipping” the chapter or track).
CLEAR
Clears the Info Display from the screen when you’re playing
a disc. When you’re using the DVD Player’s menu system, press
CLEAR to go back to the DVD Player’s main menu.
Summary of Contents for RC5220P
Page 1: ......
Page 84: ...82 Assistance Section ...
