18
Setup and Connections
Component
buttons: TV and
DVD
Helpful Hints about the Remote
Pick the Right Mode
Do you keep pressing the buttons on your remote control and
nothing happens? The most common solution, according to our call
center representatives, is putting the remote in the correct mode.
The remote control packed with your player is able to operate the
DVD player or the television, but you have to tell the remote which
component you want it to operate. If the remote is operating the TV,
it’s in TV mode and if it’s operating the DVD,
it’s in DVD mode. So
make sure you press the appropriate component button on the
remote that matches the component you want the remote to operate.
Point the Remote in the Right Direction
Another tip—point the remote at the component. When you want the
remote to operate the DVD Player, point the remote at the DVD
Player
not
the TV. The remote has to be pointed in the correct
direction and toward the correct component in order for the remote
control’s signal to communicate with the sensor on the component.
You must make sure there is a clear path between the remote control
and the component you want to operate so the signal isn’t blocked.
Summary of Contents for RC5220P
Page 1: ......
Page 84: ...82 Assistance Section ...
