78
Assistance Section
Common Problems
Solutions
Subtitle and/or audio
If the subtitle and/or audio language does not exist on the disc, the
language is not the one
initial settings will not be seen/heard. The disc’s riority language is selected
selected from the initial setting
instead. Set the subtitle and/or audio language manually through the
Info Display.
The menu is displayed in
The Menu Language preference is set to that language. Go to
Language Prefs
in
a foreign language
Setup
menu and select the language you prefer. See p. 47.
Play doesn’t begin
The rating of the title on the disc exceeds the rating limit set in the
DVD Limits
when you press PLAY
Divx
Limits
menu. Unlock the player or change the rating limit in those menus.
No forward or reverse scan
•
Some discs have sections that prohibit rapid scanning, or title and
chapter skip.
•
If you’re trying to skip through the credits warning information at the
beginning of a movie, you won’t be able to. This part of the title (movie) is
often programmed to prohibit skipping through it.
Disc won’t play
Both the player and the disc are coded by region. If the regional codes don’t
match, the disc cannot be played. This player is Region No. 1.
Desired angle cannot be changed
Some discs don’t have the multi-camera angle system, and some discs only have
it in certain parts of the movie.
Picture has wrong aspect ratio
Change the
TV Image
setting in the
Setup
menu. See p. 48.
I forget the password
Your player is equipped with a “back-door” unlock sequence. Press and hold
the STOP button on the front of the DVD Player and the STOP button on the
remote control at the same time. (Hold both buttons down at the same time
for at least 3 seconds).
Cannot copy discs to video tape
You can’t record digital video discs onto videocassettes because the discs are
encoded with anti-copy protection.
Disc tray won’t open
Disengage the dealer tray lock feature. Press and hold a combination of buttons
on the front panel at the same time. Press and hold STOP, ON•OFF, and
OPEN•CLOSE for at least three seconds.
Disc won’t eject
When you put a disc into the player, the player reads the disc which may
take up to 15 seconds. You won’t be able to eject the disc during this time.
Wait 15 seconds and try again.
Troubleshooting
Summary of Contents for RC5220P
Page 1: ......
Page 84: ...82 Assistance Section ...