7
INSERT CABLE INTO
3.5MM A/V PORT AS SHOWN
General Operation
The projector can accept a 15-pin RGB input
source from a laptop’s external monitor port or
graphics card. This source is connected through
the 15-pin “VGA” port on the back of the projector.
Max Supported Resolutions:
NTSC: 720x480
PAL: 720x576
To connect via VGA input, plug the cable into the back of the projector. Then
select the “VGA PC” option in the Main Menu. This will enable the projector to
receive VGA signals.
Important
: Be sure to setup the computer to enable video signal output. If
you are using the P50M Mini Projector as an external monitor on
Windows based systems, this can be done by selecting “extend my desktop
to this monitor” in the Screen Resolution menu.
manual for how to properly output video signals. Some Apple® computers
may require a DVI to VGA adapter.
Accepted Display Resolutions:
800x600 (native / optimal)
1024x720
Connecting an Audio/Video input source - The projector can accept
are connected through a 3.5mm A/V cable adaptor.
