15
Troubleshooting
THE PROJECTOR DOES NOT TURN ON
POSSIBLE CAUSES
SOLUTION
If you hear a fan, the unit is still running it’s cooling cycle.
Wait until the projector has fully cooled to restart.
Check to ensure the power outlet or battery source is good.
Check the power adapter to ensure a proper connection with
the wall outlet as well as the projector.
There is no power
The projector is in the
shut-down cooling cycle
THERE IS NO PICTURE
POSSIBLE CAUSES
SOLUTION
The video source is not
properly connected.
Check the video source signal to ensure that it is
properly connected.
The correct input source
has not been selected.
Select the correct input source by pressing the
Source key on the remote.
THE IMAGE IS BLURRED
POSSIBLE CAUSES
SOLUTION
The Projector is not in focus.
Adjust the focus with the focus adjustment dial until the
image comes into focus.
Move the projector so that it is at both 180 degrees and on
an even plane with the screen. Please see Page 6 for details.
SD CARD IS NOT RECOGNIZED
POSSIBLE CAUSES
SOLUTION
SD Card is not inserted
properly.
Re-insert SD Card.
SD Card is damaged.
Replace SD Card.
Remote Control Does Not Work
POSSIBLE CAUSES
SOLUTION
The remote control battery
is dead.
Replace the battery with compatible CR2025 battery.
The remote control is not
being aimed properly
For best results, aim the remote control at the back panel of
the projector.
The Projector is offset from
plane/angle of operation.
