background image

Using the TV’s Features

Chapter 3

39

Listings

The 

Listings

 appear each time you enter the GUIDE Plus+ system. They display the current programming

for each channel. The current program of Antenna A is displayed in the video window.

OK

Blue action
button

Green action
button

Press the up and down arrow buttons on the remote to browse
channel listings and the channel up and down buttons to page
through the listings. Use the right and left arrow buttons to browse
future program listings.

Press the Green button to skip ahead 24 hours; press the Blue button
to go back 24 hours.

To tune to a channel, highlight the program you want to view in the
channel listings and press OK.

Directly access a channel by using the number buttons. To access a
digital channel, enter major # (13), right arrow, then subchannel #.

Use the Guide Action Buttons as described below.

Guide Action Buttons

The Blue and Green action buttons’ actions or commands change
according to where you are in the GUIDE Plus+ system. Be sure to look
at the action bar before pressing the action buttons.

When highlighting a program, the following Action buttons appear:

Watch

Press the Blue button on the remote to place a timer into the

Schedule so the TV turns on and tunes to the program highlighted in
the channel listing.

Record

Press the Green button on the remote to place a timer into

the Schedule so the VCR records the program highlighted in the
channel listing.

If you have a cable box, changing channels on the TV causes the
cable box channel to change while recording.

Record appears only if you have set up the GUIDE Plus+ system and
specified your VCR type.

Important Note:

 You need to make sure that your VCR is tuned to

the Line INPUT, and is turned off prior to recording start time. Do
not change channels on the TV or VCR when making a recording.

Expanded Information

Press INFO on the remote to see additional program information.

If you are highlighting a digital channel, the
channel label will include a subchannel, such as
CBS [8-4].

Listings menu selection

Action buttons

Network logos (if available) or labels

Summary of Contents for Gemstar guide +

































































































Reviews: