- 5 -
EN
Power Supply
connections
B. Watching a DVD on the DVD Player and the Monitor
you can watch the same DVD on the DVD player and the monitor.
Watching a DVD on the DVD Player and the Monitor
1. Connect the built-in AV cable to the DVD player.
2. Turn on the DVD player and the monitor.
3. Play a DVD on the DVD player; the monitor will play the same
DVD at the same time.
A.2.
Connecting a TV (for the DVD Player Only)
If your TV has Audio/Video inputs, you can connect the DVD player
to your TV using a standard A/V cable (not included).
Watching a DVD on your TV
1. Connect your TV to the DVD player using a standard AV Cable (not
included).
2. Turn on the TV and follow the instructions included with it to
play the DVD.
Notes:
• Make sure to use the correct Audio/Video cable. Connecting the
plugs incorrectly may cause a weak signal.
• If your TV does not have Audio/Video inputs, you will need
to purchase an RF modulator (sold separately) and follow the
instructions included with it to connect the unit to your TV.
C. Using the Built-in Battery
The unit has a built-in, non-replaceable, rechargeable battery. Charge
the built-in battery before using it for the first time. Complete
charging typically takes approximately 3 hours. The charging green
light will go out when the built-in battery becomes fully charged.
Warning:
• The built-in battery can only be recharged when the unit is in
CHARGE mode while using the AC power adapter.
• The built-in battery cannot be recharged when the unit is in ON
mode.
• Do NOT recharge the built-in battery in a vehicle using the car
power adapter.
• Batteries should not be exposed to excessive heat such as sunshine,
fire or the like.
Notes:
• When the built-in battery power is low, "Battery Low" will display on
the screen and the unit will stop playing.
• Recharge the built-in battery when you are ready to use it again.
• While using the built-in battery, the environmental temperature
should be 41°F (5°C) to 95°F (35°C).
• To get the longest service life of the built-in battery, charge at
indoor-temperature.
• The built-in battery in this device may present a risk of fire or
chemical burn if mistreated. Do not disassemble, heat above 212
o
f
(100
o
C), or incinerate.
• The unit should not be exposed to excessive heat such as sunshine,
fire or the like.
• When discarding the unit, environmental problems must be
considered and local rules or laws governing the disposal of such
products must be strictly followed.
To recharge the built-in battery
1
To AC power
outlet
2
To DC IN 9V
- 12V Jack
3
Slide the
switch to
CHARGE
4
Charging
green light
ON
5
Recharging is completed
when charging light goes out
AC power
adapter
DVD Player
A.1. Connecting a TV using HDMI output (best option)
HDMI (High Definition Multimedia Interface) supports both video and
audio on a single digital connection for use with DVD players, set-top
boxes and other digital AV devices.
For TVs that support it, HDMI can provide
the best quality audio and video output
(depending on media source), and so is the
preferred connection type. A HDMI cable
(not included) incorporates both audio
and video signals, so you will have just
one cable running from the unit to your
TV. Using an HDMI cable (not included),
connect the HDMI OUT jack on your unit
to the HDMI IN jack on your TV or HDMI-
compatible display.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing
LLC.
DVD player
HDMI cable
(not included)
DVD player
TV
AV cable
(not included)
TO AV
OUT
AUDIO
IN
VIDEO
IN
TO AV OUT
Built-in
AV cable
DVD player
Monitor
