RC Logger 88002RC, Operating Instructions Manual

Page: 20 / 40

20
3. Move the throttle lever backwards to the neutral position (motor off), all other control devices should
be set to neutral.
4. Do you want to try out “nick reverse”? (During “motor off” the pilot stick for throttle is pulled away from the
body), then bring the throttle lever forwards into the max. position before you connect the rechargeable
battery.
Programming of “throttle”
Connect the charged battery to the RC EYE 450. This begins with a self-test and directly afterwards with the
programming of the channels. On the basis of the throttle setting, the RC EYE 450 automatically recognises
which channel you would like to use for the throttle.
As a confirmation, the red LED of the RC EYE 450 flashes in 2 rhythms (2 x short flashes, then a longer
pause, then 2 x short flashes again etc.)
Programming of “rudder”
1. Now move the rudder lever to left full scale left and hold
it there for at least one second.
2. The RC EYE 450 thus recognises the rudder channel
and memorises this.
3. Move the rudder lever back to neutral position with the
rudder still on zero.
4. As confirmation, the RC EYE 450’s red LED flashes in
a cycle of 3s (3x short flashes, then a pause etc.)