RC Logger 88002RC, Operating Instructions Manual

Page: 13 / 40

13
1. Rotors and motor shafts are provided with a hexagonal bolt (3).
2. Place the propellers (1) on the motor shafts (3) so that they lock into place in the hexagonal bolt. Mind
the inscriptions (2).
3. Now insert one of the provided spring washers (4) at a time between the rotor and spinner (5), as
otherwise the rotors may become loose during flight.
4. Tightly screw the spinners to the motor shafts using a suitable open-ended spanner.
Tightening the screws too tightly can damage the motors. Here, the shafts may tear or
be disconnected from the support. The motors operate sluggishly and this can have a
negative effect on the flight characteristics. Please therefore verify after tightening the
rotors that all of the rotors can turn easily. The snap ring (6) on the underside of the
motors must be able to move and must not jam.
Ensure before each operation that the rotors are firmly screwed in place on the motors.
It is recommended that you are careful when handling work tools.