background image

RBR#0008818revA

 –  

15



mobile format. Enabling and disabling the Wi-Fi card and changing the data format is described in the Ruskin User 
Guide.

6.6  Maintenance and repairs

6.6.1  Instrument calibration

We recommend that you verify the calibration of your data logger before any critical deployment, periodically once a 
year, or if you suspect the calibration to be out of specifications. Discuss your calibration needs with RBR. In some 
cases, you will be recommended to return the instrument to RBR to have it checked and re-calibrated. Please contact us 
for our current calibration fees.

6.6.2  O-rings

The single most important item of maintenance on any RBR submersible data logger is the care of the O-rings. Any kind 
of water leak can damage the circuitry beyond repair and cause complete data loss. Every logger's seal depends upon 
its O-rings, not the end cap tightness. Therefore, proper O-ring maintenance is crucial.

Inspecting O-rings

Pay attention to the following areas:

The surface of the O-ring itself
The mating surface on the inside of the case between the threads and the open end
The inner surfaces of the groove in the end-cap where the O-ring sits

Any dirt present should be removed by wiping thoroughly with a soft, lint-free cloth. When cleaning, never use any 
material or tool which could scratch the O-ring or any of its mating surfaces. If any dirt is present in the O-ring groove, 
then the O-ring should be removed as described below to allow thorough cleaning of the groove. If an O-ring needs to 
be removed for any reason, it should be replaced.

O-rings may lose elasticity over time due to pressure, even when the logger is not deployed. We strongly 

suggest that the O-rings be replaced regularly, for example, before every deployment, or after a change of 
batteries, or at least once a year.

Summary of Contents for quartz3 Q






























Reviews: