asseMBly anD seT-up
warnIng:
Failing to properly adjust and
tighten the bolts that affix the
handlebars can cause you to
lose control and crash.
3
q
Inflating Tires
Note:
The pressurized air
supplies found at gasoline
stations are designed to inflate
high-volume automobile tires.
If you decide to use such an
air supply to inflate your tires,
first make sure the pressure
gauge is working, then use very
short bursts to inflate to the
correct PSI. If you inadvertently
over-inflate the tire, release the
excess pressure immediately.
Using a bicycle-style tire pump equipped for a Schrader-type valve, inflate both tires to the PSI indicated on
the sidewall of the tire.
1
Place handlebars in handle-
bar clamps.
2
Align parallel to fork and
tighten bolts. The handlebars
should not move forward or
back.
1
Align fender with hole in
fork and insert bolt. Tighten
securely.
1
Remove screw from front
fork. Align number plate with
hole in fork and tighten.
q
attaching Handlebars
q
attaching front fender
q
attaching number plate
