WHEELSET
OWNERS MANUAL
FOR MORE INFO ABOUT THIS PRODUCT
AND OUR OTHER PRODUCTS VISIT:
WWW.LYNECOMPONENTS.COM
I N T R O D U C T I O N
The Lyne Pulse and Amp wheelsets are mountain bike specific
and have been designed around the needs of modern
mountain bikers. These wheelsets use lightweight yet wide
rim profiles coupled with triple butted spokes and lightweight
reliable hubs.
Our wheels are made in Taiwan and have been tested to ISO
4210 safety standards.
I M P O R T A N T N O T E S
I N T E N D E D U S E
Your wheelset is one of the most crucial parts of your bicycle, if
misused the result could be serious injury or death. Please take
serious note of the following points:
Pulse 30
This wheelset is made for cross country (XC) and mara-
thon use. This includes gravel roads and moderately
technical single track. This may include moderately rocky
terrain and sandy conditions. If you are a heavier rider you
may want to consider the AMP series as your XC or
marathon choice.
Amp 30 V2
These wheelsets are made for Trail & Enduro use. This
includes gravel roads and technical single track terrain.
This may include rocky terrain with moderate jumps.
These wheelsets are not intended for downhill
riding/racing and should not be used for large jumps and
extremely rough conditions at high speed.
W E I G H T L I M I T A T I O N S
Pulse 30:
Rider weight under 100 kg
Amp 30 V2:
Rider weight under 120 kg
M A X I M U M I N F L A T I O N
Do not over inflate your wheels, this could seriously
damage your rims and could cause severe wheelset
failure which may lead to injury or even death.
Pulse 30:
29” Maximum Pressure: 3.2 bar/46 psi
AMP 30 V2:
29” Maximum Pressure: 3.2 bar/46 psi
WARNING
These wheelsets should be used in accordance with our
intended use section below, they are not for downhill riding
or racing, users will take full responsibility for the conse-
quences if this is not followed.
Please check our weight limitations below and do not
exceed these.
Please ensure that these wheels are compatible with other
parts of the bike before installation.
Do not continue riding if wheels are damaged.
Do not attempt to modify the wheels in any way, users will
take full responsibility for the consequences if this is not
followed.
Do not use metal tyre levers or screwdrivers to install the
tyre, this could damage the rim and rim tape.
Do not over inflate your wheels, this could seriously
damage your rims and could cause severe wheelset failure.
Use compressor pumps with caution, over inflation can
occur very quickly causing rim damage.
Ensure to deflate tyres when travelling on aeroplanes to
avoid damage due to pressure fluctuations.
Maintain your wheelsets regularly as described under
Maintenance below.
