6
razberi™ Technologies
2.
Preparations and Initial Setup
This chapter provides information about system requirements forinstallation, operation, and power connections.
2.1 Initial
Installation
The product box includes the following hardware:
Connect the razberi™ to the external power supply using the available adapter connection. Connect the external power
supply to the power cord. Connect the power cord to an available outlet.
Use the wall mounts and mount kit to mount the razberi™. Use the following steps to mount the razberi™ to the desired
location. Along with basic installation tools, a #1 Phillips Head screwdriver is required for mounting the razberi™.
1.
Attach the razberi™ unit to the wall mounts by using a Phillips Head screwdriver to fasten one mount to each
side of the unit with the provided screws. Fasten the screws into the available holes in the unit as shown in the
following example.
2.
To mount the razberi™ unit, place the razberi™ in the desired location and use the available holes in the two
attached mounts as templates to mark the locations for the drywall anchors.
3.
Make four holes in the locations previously marked on the wall and insert the four drywall anchors into the holes
as shown in the illustration below.
4.
Align the available holes in the two mounts with the anchors in the wall. Fasten four screws (provided in the
product package) to the four anchor holes to fix the mounts to the wall as shown in the following illustration.
