Raytheon Pathfinder ECDIS, Operator'S Manual

Page: 35 / 370

Operator Manual
Raytheon Anschütz GmbH
Germany
R
ECDIS
2 − 5
3655DOC020102 Edition: 30.MAR.2007
4
Anti − clutter filter ON/OFF , press the button.
In case of heavy clutter developing on the Radar Video, the NSC computer
creates a profile of the echo. Within this profile, the received echoes are
monitored for a certain period (Scan
− to − scan method). Irregular echoes are
suppressed on the Radar Video. Regular echoes are indicated on the Radar
Video.
5 Hides the symbols in the radar video.
Press the button and the artificial symbols will disappear. Press again to show
the symbols.
Symbols are EBLs, VRMs, PL, ARPA zones, MAPs.
6/
1
Status indicators , press toggle switch (7). The activated function is indicated by
( ). Use the dial (11) to adjust EBL . Use the dial (16) to adjust VRM .
7
Toggle switch . Can be switched between upper position, Gain / Sea and lower
position, VRM / EBL . See status indicators (1/6) and use dial (16) or dial (11).
8 Toggle switch . Range selection, switches the radar ranges up and down.
ECDIS function: Zoom in or out.
9 Radar and ECDIS:
Alarm indicator
(flashing) and alarm acknowledgment
10 Radar and ECDIS:
Dimmer
buttons for button illumination and radar display backlight .
Press both buttons to switch between Day/Night mode .
11
Dial , see
6/
1
.
12
Press button until the desired values is indicated. The Trails indicator changes
to the next higher mode .
The steps available are OFF, 1.0, 3.0, 6.0, OFF, see TRAILS toggle field in infor-
mation panel.
13 Press and hold the button. The Heading Line disappears during this time.
14 Press button to change VECTOR LENGTH .
15
Center to reset your own ship to the middle of the PPI or to activate OFF
Center.
16
Dial , see 1/6.