Raytheon Pathfinder ECDIS, Operator'S Manual

Page: 57 / 370

Operator Manual
Raytheon Anschütz GmbH
Germany
R
ECDIS
2 − 27
3655DOC020102 Edition: 30.MAR.2007
2.5 CURSOR SYMBOLS
The cursors, Figure: 1 − 25 (below), located at the bottom left of your screen
displays cursor information. The arrow on the screen is the cursor. You will use
the cursor to perform most of the ECDIS’s functions including selecting menus,
activating commands, and placing objects such as waypoints and markers in the
display. You can move the cursor using the trackball; simply roll the ball and the
cursor follows your movements.
The cursor appears as a variety of shapes and enters a variety of modes. By
default, it remains in Center on Cursor mode unless a command is being
performed. Depending on the command being performed, the cursor changes
into one of the following shapes and enters one of the following modes. The
cursor mode appears in the information panel (in the cursor box area).
Chart Area used as cursor inside the chart area
Target used to select objects in the display
that you want to delete or modify
Digitizer Puck (option) this cursor symbol displays
when the digitizer works with the ECDIS
Display Scroll down
Display Scroll left
Display Scroll right
Display Scroll up
Zoom In used to draw a box around an area
you want to enlarge
Menus / Dialogs
Vertical bar
Change the window size
scrolls the display 1/2 a screen in the
direction the arrow is pointing
A
Radar Cursor (A,B,C..)
Figure: 1 − 25
Cursor Symbols