Raytheon Pathfinder ECDIS, Operator'S Manual

Page: 258 / 370

Operator Manual
8 − 30
3655DOC020102 Edition: 30.MAR.2007
8.2.5 Show Route (Primary or Secondary)
The Show Route command centers the display on either the active waypoint of
the open route, or if there is no active waypoint, the first waypoint in the route.
Procedure:
Step 1 Select Open Route from the Routes menu..
Select Show Route .
The display is centered on either the active waypoint or first waypoint
in the route.
8.2.6 List Route (Primary or Secondary)
The List Route command enables you to display information about the open
route. When you select the command, TextView opens and displays information
about your route (see chapter 8.2.3,
Step 3 ).
Figure: 1 − 23 Listing Waypoints using TextView