Raytheon HSB L755, Owner'S Handbook Manual

Page: 141 / 224

Chapter 5: Standard Chart Operations 5-13
M
ov
ing
a
W
ay
po
int
➤
To delete a waypoint using the waypoint list:
1. Select the waypoint from the waypoint list as previously described. The
waypoint list soft keys are displayed.
2. Press the
EDIT WAYPOINT
soft key, followed by
ERASE WAYPOINT
. The way-
point is removed from the screen and the waypoint list is updated.
Moving a Waypoint
You can move any waypoint except the target waypoint (the waypoint you are
following). You can use the Waypoint soft keys and cursor to move the
selected waypoint, or you can edit the waypoint position.
CAUTION:
Take care when editing waypoints as it is possible to move waypoints that
are used in routes stored in the Route Database
List.
➤
To move a waypoint using the cursor:
1. Move the cursor over the waypoint, until the letters
WPT
are displayed. The
waypoint soft keys are displayed.
2. Press
MOVE WAYPOINT
, the cursor changes to a four-headed arrow.
3. Move the cursor to the required waypoint position.
Press
ENTER
to set the position and return to normal cursor control.
Press
CLEAR
to cancel the operation.
➤
To move a waypoint using the Waypoint Edit functions:
1. Select the waypoint using either the cursor or the waypoint list as described
above. The waypoint soft keys are displayed.
2. To edit the waypoint position proceed as previously described in Editing
the Waypoint Details on page 5-11.
MARKS
WAYPOINT
LIST
WPT
MOVE
WAYPOINT