GP Monitor
28
Rev. F 10/2011
GP Series
6.
Press the button until the temperature mode is displayed.
3.4.6
Degrees C and F
You can change the temperature display unit from °C to °F, from °F
to °C, or to both off by completing the following steps:
1.
Press the button until a “C” shows in the display.
Figure 19: Degrees C Activation Display
2.
Pressing the
and
buttons activates or deactivates °C as a
temperature measurement unit. If you select number “1”, °C is
active; if you select number “0,” it is inactive. See the following
table for setting configurations.
3.
Press the
button again brings up the degrees F activation
display. To activate or deactivate degrees F, press the
and
arrows.
4.
Press the button until the temperature mode is displayed.
°C
°F Function
1
0
°C lit on monitor
0
1
°F lit on monitor
0
0
To disable °C/°F indicators (only for H004 and H005)
1
1
Not available
Table 9: The °C and °F Configurations
