GP Monitor
GP Series
Rev. F 10/2011
27
The deadband is the temperature/value band (±) about a setpoint,
wherein an alarm output or relay cannot change state.
3.4.5
Analog 4 - 20 mA Output
Note:
The 4 - 20 mA analog output is disabled when the
thermocouple output is active, see section 3.4.10
Thermocouple
Output, page 32.
Complete the following for setting a temperature to correspond to
the 4-20mA analog output:
1.
Press the
button until the 4 mA output display displays, see
the following figure.
Figure 17: 4 mA Analog Output Display
2.
Press the
button again, and the current 4 mA temperature
displays.
3.
Press the
and
buttons to adjust the temperature value.
4.
Pressing the button again brings up the 20 mA display.
Figure 18: 20 mA Analog Output Display
5.
Press the
and
buttons to adjust the temperature value.
