GP Monitor
10
Rev. F 10/2011
GP Series
4.
You will need to attach wires to the monitor’s terminals and
attach the rear cover before mounting the bracket onto a surface.
(Refer to the manual for wiring instructions for your particular
device.)
5.
Use 3 appropriately sized screws or bolts to fasten the bracket
onto your work surface.
This completes the monitor bracket accessory installation.
3.2.2
Cutout Template and Cosmetic Frame
If you are mounting your monitor into a panel, this plastic frame can
be used as a template for determining the proper dimensions for
your panel cutout. To use, hold or tape the template against the panel
at the location where you want to mount the monitor, and mark
around the inside edges, see Figure 5.
Once you cut the panel, you can use this template as a frame to hide
scratches or small voids on the panel that might have been created
during the cutting process.
To install, simply insert the frame between the monitor bezel and
mounting gasket prior to inserting the monitor into the panel.
