Raytec PULSESTAR VTR6, Installation Manual

Page: 16 / 36

12
6
Connections
See Section 10, Reference information for information on connection
ratings. All connections are provided on a 17-way bulkhead connector. The
connector pin-out varies according to the options provided. The bulkhead
connector details are as follows:
Connector shell: Hummel AG code 7.420.000.000
Connector insert: Hummel AG code 7.003.917.101N
Connector pins: Hummel AG code 7.010.901.001
Assembled cables are available from Raytec to the customer’s specification. If a
standard cable assembly is provided by Raytec, then the wire colours will be as
shown below.
Bulkhead
connector pin ETH option RS232 Wire colour (std
cable assy)
6
7
8
9
Power - Power - Black
Blue
Grey/Pink
Green/White
2
3
4
5
Power + Power + Green/Brown
Red/Blue
Violet
15 TRGI - TRGI - White
14 TRGI + TRGI + Brown
12 Tx + No connect Grey
13 Tx - TXD Pink
10 Rx + RXD Yellow
11 Rx - GND Green
17 TRGO - TRGO - Yellow/White
16 TRGO + TRGO + Yellow/Brown
1 Case ground Case ground Screen
6.1 Power supply
Refer to the information in Section 2, Safety (or Section 3, Sicherheit, or Section
4, Sécurité) concerning power supply arrangements for the VTR6. Choose a PSU
that limits its output current by design, by setting the current limit on the supply