T7 Installation & User Manual
32
13.3 Changing the Remote Battery
If the remote control is not working after verifying that the remote is synchronized with the receiver, change
the remote battery.
1. Slide the battery cover back on the remote (Figure 13-3).
2. Insert a CR2025 type battery ensuring that the +/- polarities are properly aligned.
3. Replace the battery cover. The remote control may need to be synchronized with the receiver. Refer to
section
13.2 Programing the Remote
.
Figure 13-3 Change the remote battery
Warning:
Do not recharge, heat or disassemble the batteries.
Do not cross polarities.
