RAYN Lyda, Installation And User Manual

Page: 8 / 24

4 Lamp Head and LED Driver Installation and User Manual
System Overview
The Lyda lamp head ships complete with the LED driver and a lamp cable. A regional specific
power cable is available for connection of the LED driver to the mains power. See
Accessories
on page 7 .
Rotate
clockwise
to disconnect
Rotate
counter-
clockwise
to connect
6
5
3
2
7
4
(3 m [10 ft])
1
2
ID Description Notes
1 LEDs
Available in Sun Spectrum (5000K) LEDs or White plus Deep Red LEDs
2 Suspension
Points Each end cap offers three suspension points. One on top for straight down
installation, and two others for sideways installation. The lamp head must be
supported on both ends when installed.
3 Lamp Cable
Input
Attach the lamp cable from the LED Driver to the lamp head input receptacle.
•
Rotate the locking ring counter-clockwise to connect the Lamp Cable to the
lamp head.
•
Rotate the locking ring clockwise to disconnect the Lamp Cable from the
lamp head.
4 Lamp Cable The lamp cable between the driver and the lamp head is provided (3 m [10 ft]).
5 1-10 V
Dimming
Input Optional use for dimming control. Remove the protective cover for connection of
a DMX Adapter or a third-party 1-10 V dimming controller.
6 LED driver The power source for one Lyda lamp head and auxiliary power for the DMX
Adapter accessory. See
Electrical
for details.
7 Input Power
Cable
Adapter Attachment point for a regional specific power cable. Available with regional
specific connector or bare ends. See
Accessories
for details.