Raymarine ST70 Instrument, Installation Manual

Page: 36 / 73

26 ST70+ User Reference Manual
• Wind speed to either knots or meters per second.
• Heading to either magnetic or true.
• Flow rate to either US gallons per hour, UK gallons per hour or liters per hour
• Temperature to degrees Celsius or degrees Fahrenheit.
• Pressure to pound per square inch or kilo Pascals.
• Volume to either US gallons, UK gallons or liters
• Number of engines to either 1, 2, 3, 4 or 5.
• Number of batteries to either 1, 2, 3, 4 or 5.
• Number of fuel tanks to either 1, 2, 3, 4 or 5.
Press
OK
to see the second Units summary page, and if you want to return to the first
page from the second, press
CANCEL
.
Check the information on the Units summary
pages, then with the second Units summary page
displayed, press
OK
to display the Select units
menu.
If you want to change any data units, carry out the
Changing units procedure below.
If you do not want to change any data units,
proceed from
Leaving units setup below.
Changing units
To change any data units:
1. With the
Select units menu displayed, scroll to select the type of data you want to
change, i.e. Speed, Depth, Distance, Wind Speed etc.
2. Press
OK
to display the setup page for the
units you have selected.
3. Scroll to select the required units.
4. Press
OK
to save the units setting and return to
the first Units summary page.
5. Press
OK
twice, to display the Select units
menu.
6. If you want to change any other units, repeat
steps 1 to 5 of this procedure.
Leaving units setup
:
When your data units are set as required:
1. With the
Select units menu displayed, scroll to
the Continue option.
2. Press
OK.
Initial setup now ends.
i
D11161-1
Select units
Wind Speed Units
Select units to change, using <
or >.
Press OK to select
i
D11162-1
Press OK to accept
Wind Speed Units
KTS
Select required units, using < or
>. CANCEL exits without saving
i
D11160-1
Select units
Continue
Select units to change, using <
or >.
Press OK to select
87099_1.book Page 26 Thursday, March 12, 2009 10:18 AM