Raymarine ST5000+, Owner'S Handbook Manual

Page: 40 / 108

28
ST5000 Plus Sterndrive & Hydraulic Autopilots Owner’s Handbook
4.2 Dealer setup
Dealer Setup allows you to customise the autopilot to your boat.
However, the factory default settings will provide safe performance for
the initial sea trial, and fine tuning is not normally required.
The flow chart on the next page shows you how to enter Dealer Setup,
scroll through the setup displays, adjust the values and exit.
The features that can be adjusted are listed in the table following the
flowchart. If you change any of the settings you can record them in the
New Setting column for future reference.
Information on the functions of the different settings is given in the
remainder of this section. The following points should be noted:
• Make sure that the autopilot is in Standby mode before you access
Dealer Setup
• Setup options are always saved on exit
132_4c04.p65 14/06/99, 10:34 28