Raymarine RC400, Owner'S Handbook Manual

Page: 83 / 136

Chapter 5: Operation 73
Note: The Set Up Function Bar remains displayed in each display mode.
To remove the Set Up Function Bar, press
CLEAR
.
CDI Display
The CDI display shows Cross Track Error (XTE) and distance to
waypoint presented in a “runway” format:
Figure 5-5: CDI Display
The runway represents a 0.3nm width with the vessel symbol shown on
the center line when the vessel is on course. Cross Track Error (XTE),
Bearing to Waypoint, Distance to Waypoint, Time to Go (TTG), Course
Over Ground (COG) and Speed Over Ground (SOG) are also shown.
Time to Go is calculated on the basis of distance to destination and Speed
Over Ground (SOG) towards the destination.
At waypoint ranges greater than 4nm, the symbol remains at the top of
the screen. As the waypoint range falls below 4nm, the symbol moves
down the center line.
The checkered pattern moves down the screen to simulate movement
when SOG is greater than 2 knots.
D6241-1