Raymarine RC400, Owner'S Handbook Manual

Page: 29 / 136

Chapter 2: Installation 19
2.8 System Check and Initial Switch On
When installation is complete and all connections have been made, re-
check the installation before using the system for navigation. If problems
occur, refer to
Chapter 6:Maintenance & Troubleshooting .
Initial Switch On
To switch on the chartplotter, press the
POWER
key.
If necessary, adjust the lighting and contrast (see Chapter 4 ).
If desired, change the default language settings as follows:
1. Press the
PAGE
key to display the setup function bar.
2. Using trackpad left/right, select the
SYSTEM SET UP
function and press
ENTER
. The
SYSTEM SET UP
menu is displayed, listing the parameters
and their current settings:
Figure 2-7: System Set Up Menu
3. Using trackpad up/down, select the
LANGUAGE
option.
4. Using trackpad left/right, select the desired language.
5. Press
ENTER
to return to the setup functions. The chartplotter now
uses the selected language.
6. Press
CLEAR
to return to the normal chart screen.
SYSTEM SET UP
DISTANCE UNITS
DEPTH UNITS
VARIATION
NM
METRES
_.__
BEARING MODE TRUE
D6531-1
SPEED UNITS KNOTS
DATE FORMAT
TIME OFFSET
SIMULATOR
SIMULATED SOG
DD/MM/YY
UTC
OFF
____
VARIATION MODE AUTO
LANGUAGE ENGLISH
SCREEN SAVER
LIGHT SAVER
OFF
OFF
SIMULATED COG ____