Raymarine RC400, Owner'S Handbook Manual

Page: 3 / 136

iii
About this Handbook
Introduction
This handbook describes the RC400 Portable GPS Chartplotter. The
RC400 utilizes Satellite Differential (SD) signals for enhanced
navigational accuracy.
The RC400 GPS Chartplotter can be used portably with the supplied Ni-
MH batteries or fix-mounted while connected to ship’s power. The
equipment is comprised of:
• 4 in Color LCD display with Chart holder compartment for a Navion-
ics
®
Gold Chart electronic chart card
• Internal GPS antenna
• Battery tray for portable operation
The RC400 GPS Chartplotter can output GPS and Waypoint data to
operate with other equipment, such as an autopilot or repeater instrument
connected via the NMEA 0183 interface.
Note: This handbook contains important information about installing,
using and maintaining your new Raymarine product. To get the best from
the product, please read this handbook thoroughly.
Conventions Used
Throughout this handbook, dedicated buttons are referred to in bold
capitals (for example,
ENTER
). Functions, modes of operation and
options are shown in normal capitals (for example,
LIGHT)
.
Operating procedures, which may consist of a single key-press, or a
sequence of numbered steps, are indicated by a
➤
symbol in the margin.
When textual data is displayed on screen, any unavailable data is shown
as dashes, one per character.
Where procedures refer to Select , this implies using the trackpad to
highlight a function and then pressing the
ENTER
key.
© Raymarine Limited 2004