Raymarine Raydata, Installation And Operating Handbook

Page: 19 / 87

10 RAYDATA Installation and Operation Handbook
Siting of Depth Transducer (Standard Through Hull)
The same mounting rules apply to the depth transducer as those listed
on the previous page for the speed transducer.
The depth transducer must be vertical to within 10°, forward, aft and
athwart ships.
10° Max
D630
2.5 Transducer Cabling
The depth and speed transducers are supplied with 32.5ft (10m) of
cable. These cables are fitted with female lug connectors that plug
directly into the back of the RayData (see below).
Allow some slack in the cables, so that the equipment can be serviced if
necessary.
Run the transducer cable back to the instrument. Avoid fluorescent
lights, engines and radio transmitting equipment. The cables should
also be kept clear of the bilges and be secured at regular intervals.
Note: Do not change the length of the depth transducer cable: this
will affect the performance of the transducer. For further
information, please contact Ray
marine
or an authorized Ray
marine
agent.