Raymarine Raydata, Installation And Operating Handbook

Page: 49 / 87

40 RAYDATA Installation and Operation Handbook
Adjusting the Anchor and Temperature Alarm Limits
The anchor and temperature alarm thresholds are both set in the same
way. The anchor alarm is used in the example displays.
For the anchor alarm, the minimum and maximum alarm depths you
can select, and the resolution of the alarms, are the same as for the
shallow and deep alarms.
For the temperature alarm, the range is 5 to 104°F (-10 to +40°C), with a
resolution of 0.1°.
To adjust the anchor or temperature alarm values:
1. Display the appropriate alarm page:
- For the anchor alarm, press
Ù Ù Ù Ù Ù
from the Deep Alarm page
described above, or
Ú Ú
Ú Ú
Ú
from the Main Depth page.
- For the temperature alarm, use the DEPTH key as many times
as required to display the Temperature page, and then
press
Ù Ù
Ù Ù
Ù
.
D3048-1
The page shows the current alarm limits, or ALARM OFF if the
alarm is turned off. To toggle the alarm between on and off, press
and hold
Ú Ú Ú Ú Ú
and
Ù Ù Ù Ù Ù
together for six seconds.
2. Press
Ú Ú
Ú Ú Ú
and
Ù Ù
Ù Ù Ù
together. The lower adjust page is displayed.
D3070-1