Mounting the Base station
Before mounting, ensure that your selected location meets the location requirements found in
this document.
• Also ensure you have planned the location for any additional components, such as the Handset
or Speaker etc.
1. Using the supplied mounting template, mark the location of the fixing holes on the mounting
surface.
2. Drill holes for the mounting fixings using a drill with a suitable sized drill bit.
3. Screw the fixings approximately half way into the holes in the mounting surface.
4. Place the Base station over the fixings screws and push down to lock into position.
5. Fully tighten the screws.
6. Connect the necessary cables.
Wired and wireless speaker mounting
Before mounting, ensure that your selected location meets the location requirements found in
this document.
39
