1. Feed the supplied heat shrink tubes over the connector ends of your antennas.
2. Plug the antenna connectors into the relevant antenna connections on the Base station.
3. Secure by tightening the locking collars.
4. Pull the heat shrink tubes down over the antenna connector, ensuring the connectors are fully
covered.
5. Apply heat evenly over the heat shrink tubes until they are shrunk uniformly and resemble the
shape of the connectors.
4.10 Wireless hub connection
The Wireless hub connects directly to the Ray90 / Ray91’s Hub connection.
The Wireless hub is required to allow connection of wireless handset stations to the Ray90 / Ray91
base station.
59
