Connection
Connects to
Suitable cables
1
GNSS (GPS) antenna
connection
Passive GNSS antenna
GNSS antenna’s fitted cable.
2
Earth stud
DO NOT CONNECT
N/A
3
VHF antenna connection
VHF antenna or Splitter
VHF antenna’s fitted cable.
4
Power and data connection
• 12 V dc power supply
• NMEA 0183 devices
• Loud Hailer
• Suitable power extension
or circuit breaker.
• cable supplied with your
NMEA 0183 device
• Loud hailer’s fitted cable
5
HS 1 (Handset station 1)
connection
Wired handset or Adaptor
cable
Wired handset’s fitted cable.
6
HS 2 (Handset station 2)
connection
Wired handset or Adaptor
cable
Wired handset’s fitted cable.
7
Hub connection
Wireless hub connection
Wireless hub’s fitted cable.
8
N2K (NMEA 2000)
connection
SeaTalkng ® / NMEA 2000
backbone
The supplied DeviceNet to
SeaTalkng ® adaptor or a
DeviceNet spur cable.
4.3 Power connection
The power supply should be connected as shown below:
1.
Radio’s fitted power cable.
2. In-line fuse.
3.
Power supply positive (+) Red wire
4.
12 V dc power source (i.e.: Distribution panel).
5. Power supply negative (-) Black wire.
6. Suitable waterproof connection (Radio is supplied with bullet crimps on power supply wires.)
7.
If, required you can extend the power cable supplied with your radio, using suitably rated cabling.
Warning: 12 Volt dc only
This product must only be connected to a
12 volt dc
power source.
50
