Raymarine P70, Installation Instructions Manual

Page: 53 / 80

Caution: Drive setting adjustments
Adjustments to the drive settings will require you to
re-calibrate the system.
6.3 Sailboat settings
These settings are only available to sailboats.
Sailboat settings can be accessed from Main menu > Set up >
Auto pilot calibration > Sailboat settings .
Note: When connected to a SeaTalk system the Sailboat settings
listed below are part of the User settings menu, Main menu >
Set up > Auto pilot calibration > User settings .
Note: Limits are set by the installed course computer and so
not all limits may be available.
Item Description Options
Auto tack
angle The Auto Tack Angle is relative
to wind angle and is not
adjustable. • Not adjustable
Auto tack
delay Auto tack delay is the delay
between actioning a tack and
the pilot applying helm. • 0 — 10 seconds
Auto Turn Amount of course change to
auto turn • 10º — 125º
• 90º (default)
Gybe
inhibit With gybe inhibit on, to prevent
accidental gybes, the SmartPilot
will prevent the vessel from
performing an turn away from
the wind. With gybe inhibit off,
you can perform an AutoTack
into or away from the wind.
Gybe inhibit does not effect
Auto Turn • Enable (default)
• Disable
Adjust settings
53