Raymarine P70, Installation Instructions Manual

Page: 39 / 80

2. To turn the pilot controller off press and hold the STANDBY
button. After 1 second a pop up will appear.
3. Continue to hold the STANDBY button for as further 3 seconds
to complete the power off.
Note: You cannot power down the pilot controller whilst in AUTO
mode.
5.4 Using the set up wizard
First Install Set up Wizard
The set up wizard contains 3 steps: language selection, vessel type
and welcome screen.
Note: If the p70 / p70r is being added to an existing autopilot
system already containing a SeaTalk ng pilot controller then the set
up information will be set automatically to reflect existing settings.
1. Highlight the required language using the UP and DOWN buttons
or ROTARY and then press SELECT .
2. Highlight the required vessel type using the UP and DOWN
buttons or ROTARY and then press SELECT .
The welcome screen shall now be displayed and your choices
have been saved.
3. Press the OK button to complete the set up wizard.
You will now be taken to the mode pages.
System checks
39