Raymarine P70, Installation Instructions Manual

Page: 44 / 80

Autolearn
You must have significant clear water in front of the vessel to
accommodate a series of maneuvers, which include sudden, sharp
turns. There should be a clear area at least 100m wide and 500m
ahead.
D12106-1
Caution: Autolearn
Please ensure sufficient free space ahead. (Minimum
100x500m long & significantly more for a high speed
vessel.
Performing autolearn
1. Ensure there is sufficient free water in front of the vessel.
2. Press CONTINUE .
A warning message will be displayed letting you know that the
vessel will zigzag and make Sudden SHARP TURNS.
3. Maintain a normal cruising speed (at least 3 knots).
4. Remove your hands from the wheel and press AUTO to begin.
5. During this procedure the pilot will count through the steps.
Ensure that ‘PASS’ is displayed signalling the completion of
autolearn.
6. Press CONTINUE to finish calibration and return to manual helm
control, pilot will be in standby mode.
You have successfully completed the commissioning process for
your SmartPilot system.
7. Where FAIL is displayed after completion of autolearn press
CONTINUE to retry autolearn.
You can cancel Seatrial calibration at any time by pressing
STANDBY .
Caution: System changes
Any additional changes you make to your system
settings may require you to repeat the calibration
process.
44
p70 / p70r Pilot controller Installation instructions