5.4 Bracket mounting using
the Deck mounting kit
The Deck mounting kit (A80437) can be used to wall
mount your product.
The Riser piece is not required for bracket mounting
the product.
1. Place the small sealing ring in the groove located on
the bottom of the mounting tray.
2. Secure the tray to the bracket using the supplied
fixings in 3 positions.
3. Place the large sealing ring into the groove on the
upper side of the mounting tray.
4. Secure the bracket to the mounting surface using
the supplied mounting template. Secure the bracket
using the supplied fixings in 3 positions.
5. Pull the SeaTalkng® cable through the mounting
bracket hole and the mounting tray. Plug in the cable
connector on the underside of the unit and secure
by rotating the locking collar clockwise 2 clicks.
6. Secure the unit to the Mounting tray by positioning
the unit with the LED facing forward and inserting
the unit into the grooves in the Mounting tray.
7. Place the Mounting trim over the unit slightly offset,
and then twist the Mounting trim clockwise until it
locks into position.
5.5 Surface mounting using
the Riser
The Deck mounting kit (A80437) can be used to raise
the product from the mounting surface.
The Wall bracket is not required when using the Riser.
1. Use the supplied Deck mount riser template to drill 4
holes in the mounting surface. Secure the Riser to
the mounting surface using 4x supplied fixings.
2. Place the small sealing ring in the groove located on
the bottom of the mounting tray.
3. Position the Mounting tray on top of the Riser.
4. Secure the Mounting tray to the Riser using 3x
supplied fixings.
28
