3.4 Tools required for
installation
1
Power drill
2
4 mm (11/64) drill bit (for fixing studs)
3
22 mm (for cable hole when surface mounting)
4
Pozi-drive screwdriver (only required for Pole mount
installations)
5
Size 4 (2.5 mm) Hex Key (only required for Pole
mount installations)
3.5 Warnings and cautions
Important:
Before proceeding, ensure that you have
read and understood the warnings and cautions
provided in the
section of this document.
3.6 Selecting a location
Warning: Potential ignition
source
This product is NOT approved for use in
hazardous/flammable atmospheres. Do
NOT install in a hazardous/flammable
atmosphere (such as in an engine room or
near fuel tanks).
Micronet device location
requirements
Your unit includes a wireless transceiver that utilizes the
Micronet networking protocol. The product’s wireless
performance should be checked at the desired location
before drilling any mounting holes.
For optimum performance the product should be
installed above decks, on a horizontally surface with the
LED ‘arrow’ pointing towards the bow of the vessel.
When planning the installation location, also consider
the following:
• The product should have a clear line of sight to the
Micronet products it will connect with. Range for
15
