Raymarine i60 ch wind, Installation And Operation Instructions Manual

Page: 21 / 70

3.7 Product dimensions
D12389-1
A C G
D E
B
F
A 110 mm (4.22”)
B 115 mm (4.52”)
C 14 mm (0.55”)
D 30 mm (1.18”)
E 35 mm (1.38”)
F 90 mm (3.54”)
G 17 mm (0.67”)
3.8 Wind vane transducer / rotavecta
location requirements
When selecting a location for your wind transducer it
is important to consider a number of factors.
The transducer's location must:
• Allow reasonable access for installation and
servicing.
• Be as high as possible and away from any
equipment which may shield the transducer or
otherwise disturb the air flow.
• Provide a horizontal mounting surface. If a surface
(e.g. mast top) is otherwise suitable but not
horizontal, make up a suitable wedged packing
piece to provide the necessary horizontal surface.
• There must also be a viable route for the
transducer cable to be routed to the product it is to
be connected to (i.e. display or converter).
Wind vane transducer and rotavecta
mounting
Ensure that the wind transducer or rotavecta is
installed in accordance with the instructions supplied
with the unit.
Planning the installation
21