Raymarine E70058, Installation And Operation Instructions Manual, Page: 30 / 68

6.1 Controls
1 3 2 4
D12375-1
i50 Depth i50 Speed i50 Tridata
1 Depth (Power)
— Select to
access depth
information,
backlight adjust,
contrast adjust
and power on/off
modes.
Speed (Power)
— Select to
access speed
information,
backlight adjust,
contrast adjust
and power on/off
modes
Depth (Power)
— Select to
access depth
information,
backlight adjust,
contrast adjust
and power on/off
modes.
2 Alarm — Select
to access alarm
levels and alarm
settings.
Trip — Select
to access log,
trip and water
temperature
information.
Speed —
Select to access
speed and VMG
information
3 Offset — Select
to access depth
offset settings.
Timer — Select
to access count
up and start
timers.
Trip — Select
to access log,
trip and water
temperature
information.
4 Reset — Select
and hold down
for 3 seconds
to reset data to
current values.
Reset — Select
and hold down
for 3 seconds
to reset data to
current values.
Reset — Select
and hold down
for 3 seconds
to reset data to
current values.
6.2 Power
Powering on the unit
With power to the unit turned on but the unit switched off:
1. Press and hold the Power button until the unit powers on and
data is displayed (approximately 2 seconds).
Note: When power to the unit is turned on the unit will switch
on automatically.
Powering off the unit
1. Press and hold the Power button until the power count down
timer is displayed and reaches zero (approximately 6 to 8
seconds).
30 i50