Product dimensions
D12269-1
A
C
D
B
E
Item
e7 / e7D
e95 / e97 /
c95 / c97
e125 / e127 /
c125 / c127
A
233 mm
(9.17 in.)
290 mm
(11.42 in.)
354 mm
(13.94 in.)
B
144 mm
(5.67 in.)
173 mm
(6.81 in.)
222 mm
(8.74 in.)
C
64 mm (2.52
in.)
64 mm (2.52
in.)
69 mm (2.72
in.)
D
160 mm
(6.29 in.)
160 mm
(6.29 in.)
160 mm
(6.29 in.)
E
180 mm
(7.09 in.)
212 mm
(8.35 in.)
256 mm
(10.08 in.)
Removing the rear bezel
You must remove the rear bezel before flush-mounting
the display.
1. Remove the front bezel. Refer to the separate
instructions provided for that procedure.
D
12184-2
*
= e 7 / e 7D
*
2
3
1
=
c95 / c97 c125 / c127 / e 95 / e 97 / e 125 / e 127
2. Remove the screws that secure the bezel to the
display.
3. Carefully remove the bezel from the rear of the
display, pulling the bezel gently along the:
i.
Outer edges - work from the sides upwards and
then along the top edge, ensuring that the clips
are fully released from the display.
ii. Inner edges - ensure that the bezel is completely
removed from the display.
Flush mounting
You can mount the display in a flush or panel mounting
arrangement.
Before mounting the unit, ensure that you have:
• Selected a suitable location.
• Identified the cable connections and route that the
cables will take.
• Detached the front bezel.
D
12271-1
1. Check the selected location for the unit. A clear,
flat area with suitable clearance behind the panel
is required.
2. Fix the appropriate cutting template supplied with
the product, to the selected location, using masking
or self-adhesive tape.
3. Using a suitable hole saw (the size is indicated on
the template), make a hole in each corner of the
cut-out area.
4. Using a suitable saw, cut along the inside edge of
the cut-out line.
5. Ensure that the unit fits into the removed area and
then file around the rough edge until smooth.
6. Drill 4 holes as indicated on the template to accept
the securing screws.
7. Place the gasket onto the display unit and press
firmly onto the flange.
8. Connect the power, data and other cables to the unit.
9. Slide the unit into place and secure using the
provided screws.
15
