Raymarine E-Series Reference Manual Download Page 39

Page: 39 / 360

Chapter 2: General Operation

Note: These icons will also appear when you are in simulator mode.

The Auto pilot is in Standby mode.

The autopilot is in Track mode.

The Autopilot is in Auto mode.

No autopilot detected.

An autopilot alarm is active.

The Auto pilot is in Power Steer mode.

The Autopilot is in Wind Vane mode.

The AIS icon indicates the current status of the AIS function:

AIS unit not available i.e. not connected or off.

AIS unit is switched on and operating.

AIS unit on with active alarms.

AIS unit switched on and operating but dangerous and lost alarm dis-
abled.

Status icon

Description

D8929_1

81244_4.book Page 15 Thursday, January 31, 2008 1:53 PM

Summary of Contents for E-Series









































































































































































































































































































































































Search results

Summary of Contents for E-Series

Reviews:

Related manuals for E-Series

Brands by name

Popular brands

Raymarine E-Series, Reference Manual

Search results

Summary of Contents for E-Series

Reviews:

Related manuals for E-Series

Brands by name

Popular brands