Chapter 6: The Fishfinder
133
To select split-screen or full-screen
1. Select
FULL
or
SPLIT
with the
ZOOM
softkey.
When the zoom function is active (ZOOM FULL or ZOOM SPLIT), you can either
select a predefined zoom factor or adjust it manually.
To select the zoom factor
1. Press the
ZOOM
softkey.
2. On the
ZOOM FACTOR
key, toggle between pre-defined settings or select xR to
set a factor manually. For manual settings, adjust the zoom factor with the rotary
controller.
3. Press
OK
to accept your setting.
Adjusting the position of the zoomed area
When the zoom function is selected, the system automatically selects the zoom
position so that the bottom details are always in the lower half of the display. If
required you can reposition the portion of the image to be zoomed so that an
alternative area is displayed.
D10613_2
81244_4.book Page 133 Thursday, January 31, 2008 1:53 PM
