Chapter 18: System setup and customizing
287
Note: When data figures are displayed at ranges of less than 1000 units, and with the
distance units set to
NM
or
SM
the system changes default display units to
feet (ft)
,
apart from
KM
, which defaults to
meters
(
m
).
System Integration Setup Menu
Speed Units
Choose the units that you require speed to be measured in.
Knots
MPH
KPH
Depth Units
Choose the units that you require depths to be measured in.
Meters
Feet
Fathoms
Temperature Units
Select required temperate unit.
Fahrenheit
Celsius
Pressure Units
Select required pressure unit.
Bar
Psi
Kpa
Volume Units
Select required volume unit.
US Gallons
Imp Gallons
Litres
MENU ITEM
OPTIONS
(Default in
bold
)
DSC Message
When set to ON, details of distress DSC messages are dis-
played on screen
ON
OFF
SeaTalk Alarms
When set to enabled, all SeaTalk system alarms are received
and displayed on the chartplotter.
Enabled
Disabled
Data Master
When set to ON, the display you are working on is defined as
the master.
ON
OFF
Bridge NMEA Heading
Used to prevent NMEA heading data being bridged onto the
SeaTalk bus. Switch this function off if you are using MARPA
with an external fast heading sensor.
ON
OFF
NMEA Output Setup
Allows you to switch off individual NMEA out sentences
APB, BWC, BWR, DBT, DPT,
GGA, GLL, MTW, RMA,
RMB, RMC, RSD, RTE, TTM,
VHW, VLW, VTG, WPL, ZDA
MENU ITEM
OPTIONS
(Default in
bold
)
81244_4.book Page 287 Thursday, January 31, 2008 1:53 PM
