0049-1800-xxx 326X V.34, V.34-SDC and V.32bis Series Modem – USER’S GUIDE 02/23/2010
Rev. A
Page 179
of
205
OTHER COUNTRY-SPECIFIC INFORMATION
This section contains information that applies to the following countries:
•
Canada
•
Denmark
•
Hong Kong
•
Spain
•
United Kingdom
•
U.S.A.
Canada
DOC Registration and Requirements
To comply with the Department of Communications (DOC) registration requirements, you must give
the following information to the telephone company:
•
Manufacturer and modem model number
: 3265, 3266, 3267, or 3268
•
Telephone number(s)
to which the modem will be connected
•
DOC Registration Number:
725-3906A (Model 3265), 725-3906AB (Model 3266), 725-
4124AB (Models 3267/3268)
•
Load Number:
4
Industry Canada Equipment Attachment Limitations
The Industry Canada label on equipment means it has been tested and found to meet requirements for
telecommunications operations and safety in Canada. The label does not guarantee, however, that the
equipment will operate to your satisfaction.
Repairs to certified equipment should be made by an authorized Raymar-Telenetics agent. If the
equipment malfunctions due to any unauthorized repair or alteration, the telecommunications company
may request that you disconnect the equipment.
Ensure that connection to local telecommunications company facilities is permissible and that the
equipment is installed properly. Compliance with the above conditions may not prevent degradation of
service in some situations.
Ground connections for power and telephone lines should be wired to a single ground line. This may
be particularly important in rural areas. These connections should be made by a qualified electrician.
If already installed, the connections should be inspected by the appropriate electrical inspection
authority.
