0049-1800-xxx 326X V.34, V.34-SDC and V.32bis Series Modem – USER’S GUIDE 02/23/2010
Rev. A
Page 4
of
205
Appendix B –
Cabling and Interface Pinouts
, contains the pinouts for the modem’s rear panel
connectors and associated cables.
Appendix C –
Country-Specific Information
, discusses the cabling, rear panel layouts, pinouts and other
modem features that are required or restricted by regulatory agencies for each country.
326X V.34 Series Modem Reference Guide
Available as an optional order item, the 326X Series Modem Reference Guide is designed for users who
require more detail on operating the modem’s configuration options and diagnostic self-tests. Contact
your Raymar-Telenetics sales representative for ordering information.
References
Refer to the following for more information:
-
326X, 326XFAST, and 326XFAST-SDC Series Modem Product Specification Sheets
-
EIA Application Note #562, Appendix A (defines cable lengths in terms of DTE rates)
NetView operators should be familiar with:
-
NetView Operations Primer (IBM Part No. SC30-3363)
-
NetView Operations Scenarios (IBM Part No. SC30-3376)
Trademarks
The following are trademarks or registered trademarks of their respective companies or organizations:
AT is a command language used with the Smartmodem 1200 and the Smartmodem 2400/Hayes
Microcomputer Products, Inc.
CompuServ / CompuServ Inc.
MNP (Microcom Networking Protocol) and Relay Gold / Microcom, Inc.
NetView and IBM / International Business Machines Corporation
Novell and NetWare / Novell, Inc.
Telenet / Sprint International Communications Corporation
Tymnet / British Telecommunications
