Rayleigh Instruments RI-ENERGYFLOW-3P-MODULAR..., User Manual

Page: 11 / 79

11
Do not touch the system with wet hands.
Do not put any heavy objects on top of the system.
Do not damage the system with sharp objects.
Do not install or operate the system in potentially explosive
atmospheres or areas of high humidity.
Do not mount the inverter and the battery pack in areas containing highly
flammable materials or gases.
If moisture has penetrated the system (e.g. due to a damaged enclosure),
do not install or operate the system.
Do not move the system when it is already connected with battery
modules. Secure the system to prevent tipping with restraining straps in
your vehicle.
The transportation of E8KT/E10KT/E12KT must be made by the
manufacturer or an instructed personal. These instructions shall be recorded
and repeated.
A certified ABC fire extinguisher with minimum capacity of 2kg must be
carried along when transporting.
It is totally prohibited to smoke in the vehicle as well as close to the vehicle
when loading and unloading.
For the exchange of a battery module, please request for new hazardous
goods packaging if needed, pack it and let it be picked up by the suppliers.
In case of contact with electrolyte, rinse the affected areas immediately
with water and consult a doctor without delay.
CAUTION
Risk of injury through lifting or dropping the system. The inverter and battery are
heavy. There is risk of injury if the inverter or battery is lifted incorrectly or
dropped during transport or when attaching to or removing from the wall.
Lifting and transporting the inverter and battery must be carried out by more
than 2 people.
1.6 Parts List
Check the following parts list to ensure it is complete.
Delivers a total system separately on site to client, this consists of:
E8KT/E10KT/E12KT