Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C15000TZ
54
8.3.3 Laser power-up, mode selection, light-out control area
Laser power-up, mode selection, light out control display area is as in Figure 35, the display content
is as in Table 15.
Figure 35 Laser power-on, mode selection, light out control display area
Table 15 Laser power-on, mode selection, light out control display area explanation
Display
explanation
Main power button
Click ON, main power on; click OFF, main power off
External control
mode
Click ON, activate laser external control; Click OFF, shut laser external control; mode
power-off memory automatically
AD mode
Click ON, AD analog mode on; click OFF, AD analog mode off;
mode power-off memory automatically
Red guide beam
Click ON, red guide beam on; click OFF, red guide beam off
Power correction
Click ON, activate laser power correction mode; click OFF, shut laser power correction mode;
mode power-off memory automatically
Eliminate alarm
Eliminate current laser alarm
Laser ON
Laser is in output
Laser OFF
Laser is off
8.3.4 Programming mode test area
The laser programming mode test area interface is as Figure 36, in which the ‘START’ button is
used to test the programming of the programming mode. This function can only run internal mode (when
external mode is turned off). Enter the current pre-tested programming number in the digital text box and
click the START button.
